Installing the LCT Tool

This section covers brief notes on installing the LCT Tool (minimum v 4.0.25)

 

MATERIALS

• Laptop/PC with Serial USB Com Port that can reach the Locks
• Serial USB Cable provided with Locks
• LCT Tool minimum version 4.0.25 Install Program (downloaded or distributed)

 

FAQs & PREREQUISITES

1. The LCT Tool must be installed on a computer that can physically connect to the Locks.

3. You must use the correct Serial USB Cable to connect Locks to the Serial USB COM Port.

4. During the LCT installation, it is recommended to accept the default settings.

 

 

Basic Steps to Install the LCT Tool

1. Get the LCT Tool by downloading it from the ASSA support site.
2. You will install the Assa LCT Tool (min. ver. 4.0.25) on a PC/Laptop that can reach the Locks with the Serial USB cable. 
3. Accept the license agreement and accept the default settings to complete the installation. The LCT shortcut will be on the Windows desktop screen.
4. Connect the ASSA Lock (WIFI or IP-Enabled ) to the USB COM Port using the manufacturer’s Serial USB Cable.
   You can only connect to one lock at a time.
5. You can launch the LCT Tool from the LCT Desktop Icon.

 

 

Next Steps ...

Before you can configure Locks, you must create a Lock Profile that contains the correct DSR Server network and security settings, as well as other common properties.

>  CREATING A LOCK PROFILE

 

If you have already created a Lock Profile for your Assa Lock, you can advance to the Lock configuration.

>  CONFIGURING ASSA LOCKS